In many electronic systems, stable operation depends on how power is generated, distributed, and sequenced across different circuit blocks. If power rails turn on in the wrong order or voltage levels are unstable, processors may fail to boot, memory can lose data, and sensitive components may get damaged. Managing this using multiple discrete regulators and control circuits increases design complexity and failure risk. A Power Management IC helps solve this by controlling multiple power functions inside a single device.
| Image | Part Number / Manufacturer | Description / Specs | MOQ | Datasheet | RFQ | |
|---|---|---|---|---|---|---|
| PTX-1 Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG ELECT | 1 | ||||
| UW2 Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP HAND TOOL 20 - 26 AWG | 1 | ||||
 | P180-1 Manufacturer: Vector Electronics Category: Wire Wrap | TOOL MANL SLIT-N-WRAP M6282C3.51 | 1 | |||
| R28B-13000 Manufacturer: Jonard Tools Category: Wire Wrap | WIRE/CABLE | 1 | |||
| R28BLK-13000 Manufacturer: Jonard Tools Category: Wire Wrap | WIRE/CABLE | 1 | |||
| P160-1B Manufacturer: Vector Electronics Category: Wire Wrap | WIRE WRAP HAND TOOL | 1 | |||
| P184-1 Manufacturer: Vector Electronics Category: Wire Wrap | WIRE WRAP HAND TOOL 28AWG | 1 | ||||
| PTX-KIT2DHFL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG W/BAT | 1 | ||||
| PTX-KIT1DHFL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG W/BAT | 1 | ||||
| PTX-KIT2FL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG W/BAT | 1 | ||||
| PTX-KIT1FL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG W/BAT | 1 | ||||
| PTX-2BFFL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG ELECT | 1 | ||||
| PTX-2FL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG ELECT | 1 | ||||
| PTX-1BFFL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG ELECT | 1 | ||||
| PTX-1FL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG ELECT | 1 | ||||
| PTXFL Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP GUN 18 - 32 AWG | 1 | ||||
| WDI-2426 Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP HAND TOOL 24 - 26 AWG | 1 | ||||
| HW-30 Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP HAND TOOL 30 AWG | 1 | ||||
| HW-26 Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP HAND TOOL 26 AWG | 1 | ||||
| WDUD-2224 Manufacturer: Jonard Tools Category: Wire Wrap | WIRE WRAP HAND TOOL 20 - 26 AWG | 1 |
Many systems in operation rely on PMICs selected during original product design. These devices are often tightly linked to processor requirements, board power architecture, and system startup behavior. When a PMIC reaches end-of-life, replacing it can be difficult. Differences in pin layout, sequencing behavior, voltage accuracy, or protection response can affect system stability.
This is common in industrial, automotive, and medical systems where equipment remains active for many years. Maintenance teams often require the same PMIC to avoid redesign or system requalification. Delays in sourcing compatible PMICs can increase downtime and service cost.
Maketronics supports global engineering and procurement teams with reliable sourcing of both active and obsolete Power Management ICs.
A PMIC is an integrated circuit that manages voltage regulation, power sequencing, monitoring, and protection to ensure stable system operation.
Correct power sequencing ensures processors, memory, and peripherals start safely and operate reliably without damage or data corruption.
PMICs are widely used in embedded systems, mobile devices, industrial equipment, automotive electronics, and communication hardware.
Replacing an obsolete PMIC may require redesign and system validation because differences in pin layout, sequencing behavior, and protection features can affect stability.
